Explosion Proof Wall Mounted Cooling Unit

Specific Systems Explosion Proof  HVAC Wall Mounted 

Air Conditioner Series  (Electric Heater)

Cooling Capacity :   59,700 ~ 597,000 Btu/h (17.5Kw ~ 175.0Kw)

Heating Capacity :  34,000 ~ 341,200 Btu/h ( 10.0Kw ~100.0Kw)

HVAC, Building Pressurization, and Humidity Control

Available for use in hazardous locations up to Class I, Division 1, Groups C, & D 

locations, as well as Class I, Division 2, Groups B, C, & D

Standard through the wall air conditioning configuration

Also configurable in Wall Mount, Pad Mount, Roof Mount, or Split configurations, 

using the same components for reduced lifetime costs

Life time cost built to demanding industrial specifications

Innovative two-stage dual refrigeration circuit provides 50% redundancy 

on units over 3 tons

Available corrosion resistant coatings and many other options

CSA certification, UL Listed panels, with ATEX and IECEX certification available.

Features and Benefits Overview

Units from two tons (24,000 BTUH) to 50 tons (600,000 BTUH) utilize dual spark-proof 

evaporator blower assemblies

Multi-stage refrigeration circuits on most units allows for 50% redundant backup cooling**

High and low refrigerant pressure on all circuits

Compressor high current/temp overload

High temperature in the heating coil

Basic features of standard InPac® HVAC control panels include two-stage 

control on both heating and cooling, automatic switching, and manual override 

switches for individual stages

Standard coils are constructed from heavy-weight rifled copper tubes 

mechanically bonded to aluminum fins

InPac® evaporator and condenser coils interlace completely separate

refrigeration circuits

Condenser coils are designed at 8 FPI to reduce clogging in 

industrial environments

Evaporator coils are designed at 11-13 FPI for efficiency

Freezestats are standard on all InPac® systems

Crankcase heaters are standard on all InPac® systems

Recommended Options

Corrosion-resistant condenser coating

Air-inlet mounted combustible gas monitor

Building-interior mounted combustible gas monitor

Explosion-proof heating elements (often required in some applications)

Chemical air filtration to reduce corrosive particles

Corrosion resistant coil coating on all coils such as our SpecificCoat 2-stage coating

Low ambient controls recommended in any location north of the 40th parallel 

N or south of the 40th parallel 

Common Applications                                                                                                                                                                                                                                                                               

Energy storage system, E-house , Remote instrument enclosue

Oil and natural gas refineries

Some water treatment applications

Offshore oil platforms

Gasoline storage or refueling areas

Flour/feed mills

Grain processing facilities

Paint booths

Textile manufacturing plants

Chemical manufacturing plants

Large scale lumber facilities