Marvair Exterior Wall Mounted Air Conditioner 8AA Series
Cooling Capacity : 36,000 ~ 60,000 Btu/h (5.27Kw ~ 17.6Kw)
Heating Capacity : 17,000 ~ 2,000 Btu /h(5.0Kw ~ 15.0Kw)
MODELS: 8AA1024A - 8AA1060A 8AA2036A - 8AA2060A
Used primarily to cool electronic and communication equipment shelters, Marvair®
wall mount air conditioners are problem solvers for a wide range of conditions and
applications. Due to the high internal heat load, these shelters require cooling even
when outside temperatures drop below 60°F (15°C). All Marvair air conditioners have
the necessary controls and components for operation during these (less than 60°F [15°C])
temperatures. All models use the non-ozone depleting R-410A refrigerant. Marvair wall
mount air conditioners are available with a factory installed economizer. When ambient
conditions are cool and dry, the economizer uses outside air to cool the shelter.
The economizer provides temperature control, energy cost savings, and increased reliability
by decreasing the operating hours of the compressor and the condenser fan. To insure proper
operation and optimum performance, all economizers are non-removable, factory installed
and tested. In addition, factory and field installed accessories can be used to meet specific requirements
➤ High Efficiency Models 8AA1024A-1060A: Marvair’s most efficient wall mount air
conditioners. Electronically commutated indoor fan motors combined with highly
efficient scroll compressors result in Energy Efficiency Ratios (EER’s) of up to 11.75.
➤ 2-Stage Compressor Models 8AA2036A-2060A: These models have a 2-stage
compressor with first stage cooling approximately 65% of the total cooling capacity.
The 2-stage compressor provides lower start-up amps which can be critical when
operating with a generator. The two stage compressor can also reduce energy costs and is
able to more precisely match the cooling capacity of the air conditioner with the heat
load in the shelter. Both non-economizer and economizer-equipped units are available with 2 stage compressors